BrotherHobby SE 2810 1350KV
SE-2810-1350KVBrotherHobby
Specification
17 stated · 0 not published
| Attribute | Value | Evidence |
|---|---|---|
| Bearing shaft | 5mm | |
| Cells max | 6S | |
| Idle current | 2A | |
| Internal resistance | 49mΩ | |
| KV | 1,350rpm/V | |
| Leads | 18AWG 250mm | |
| Length | 39mm | |
| Magnet | N52H | |
| Max current (bench) | 57A | |
| Max power | 1,419W | |
| Mount pattern | 19x19 M3 | |
| Outer diameter | 33mm | |
| Shaft thread | M5 | |
| Stator diameter | 28mm | |
| Stator height | 10mm | |
| Stator size | 2810 | |
| Weight | 67g |
Additional data
Recorded on this part, outside the typed fields for its category. Licensed accounts read the values.
Price
Indicative. Confirmed when the order is placed.
Converted
From USD at 1.1435 on 2026-07-09.
ECB euro foreign exchange reference rates, 2026-07-09 (USD per EUR, direct)
Compliance & origin
Origin
- Manufacturer
- BrotherHobby
- Made in
- not stated
- Company location
- withheld. Recorded. Visible to approved accounts.account
- NCAGE
- not recorded
- Category
- Motors
Company location is the manufacturer’s base, not the country of manufacture. Where a part states no origin, it stays unstated rather than inheriting its maker’s.
NCAGE identifies a company within the NATO Codification System. We record it where we have found it; not recorded means we have not established one, not that the manufacturer lacks one.
Design with this part
Put BrotherHobby SE 2810 1350KV into a build in Odeon Platform and its bill of materials comes back priced, sourced and checked against your programme’s compliance rules.