T-Motor Velox CINE F7 + V50A SE (30x30 stack)
TMOTOR-VELOX-CINE-F7-V50A-SE-STACKT-Motor (Jiangxi Xintuo)Vendor declared
Why these values
How each figure on this part was established
Verified by direct fetch of tmotorhobby.com (T-Motor's fetchable official storefront; other T-Motor storefronts gate automated access). Combined weight = FC 9.2 g + ESC 12.3 g (published per board). F722 + ICM-42688P, SPL06 baro, AT7456E OSD, Betaflight target TMTR VELOX F7 V2; ESC AT32F421, 50A continuous / 60A 5S peak. 30.5x30.5 phi4mm mount holes. $107.70 is the standard (non-membership) store price. FC power draw estimated. size_classes derived 2026-08-02 from voltage, not judged: the recorded 3-6S range against the size ladder's offered cells (5in offers 4S, 7in/10in/12in offer 6S, 18in offers 8S and 12S). Same rule as esc and flight_computer, re-run in SQL by ingest-assertions.sql. esc_firmware_family/firmware_flashable researched 2026-08-03, and RECORDED AT LOWER CONFIDENCE THAN THE REST OF THIS RECORD. T-Motor publishes no ESC firmware for this stack: tmotorhobby.com lists the FC firmware only ("TMTR-T-MOTORHOBBYVELOXF7V2 (BETAFLIGHT)") and the page is silent, not blocked. The AT32F421 MCU cannot decide it — it is a target for both BLHeli_32 and AM32. Four reputable retailers title the SKU BLHeli_32 (GetFPV, ReadyMadeRC, Pyrodrone, QuadPartPicker) with the same 50A/60A@5S and MCU this record already carries; one (drone-fpv-racer.com) titles it AM32, so an AM32-shipping revision may exist. Recorded as the four-source majority with the conflict stated rather than hidden. Note the neighbouring trap: this is NOT the T-Motor FLAME/ALPHA industrial line, whose family value is T-Motor and flashable locked — the Velox FPV line is a different product entirely.
Specification
13 stated · 0 not published · 0 not researched
| Attribute | Value | Evidence |
|---|---|---|
| Cell range | 3-6S | |
| Continuous current | 50A | |
| ESC firmware changeable | open | |
| ESC firmware family | BLHeli_32 | |
| Firmware | Betaflight | |
| Form factor | stack | |
| Integrated RX | no | |
| Integrated VTX | no | |
| MCU class | F722 | |
| Mount pattern | 30.5x30.5 M3 | |
| Power draw | 2W | estimated |
| Size classes | 7in5in18in10in12in | estimated |
| Weight | 22g |
not published: we looked; the vendor states nothingnot researched: nobody has looked yet estimated: derived, not vendor-stated
Price
Indicative. Confirmed when the order is placed.
Converted
From USD at 1.1435 on 2026-07-09.
ECB euro foreign exchange reference rates, 2026-07-09 (USD per EUR, direct)
Compliance & origin
Claims
No compliance claim recorded for this part.
Origin
- Made in
- withheld. Odeon-resolved. Visible to licensed accounts.declaredlicensed
- Company location
- withheld. Recorded. Visible to approved accounts.account
- Manufacturer
- T-Motor (Jiangxi Xintuo)
- NCAGE
- not recorded
- Category
- FC/ESC stacks
Company location is the manufacturer’s base, not the country of manufacture. Where a part states no origin, it stays unstated rather than inheriting its maker’s.
NCAGE identifies a company within the NATO Codification System. We record it where we have found it; not recorded means we have not established one, not that the manufacturer lacks one.
Design with this part
Put T-Motor Velox CINE F7 + V50A SE (30x30 stack) into a build in Odeon Platform and its bill of materials comes back priced, sourced and checked against your programme’s compliance rules.