TBS Source One V6 (5in)
TBS-SOURCE-ONE-V6-5INTeam BlackSheep (TBS)Vendor declared
Why these values
How each figure on this part was established
Mfr page fetched live, in stock at $29.95. No published SKU code, so mpn is a derived stable code. max_prop_in 5 from the official 5-inch product designation (240 mm wheelbase class). Current generation of the open-source platform several community frame makers derive from; best price/documentation ratio in class. motor_mount_pattern researched 2026-07-29 from the source below, recorded verbatim as “dual 16x16 / 19x19 arm pattern”. stack_mount recorded as a LIST 2026-08-02 (D112). The frame's own kit_note states it accepts 20x20 M2 for the flight stack beside the 30.5x30.5 M3 it already recorded; the field was single-valued until D112 and could only hold the primary, which read as a denial of the rest and mismatched every 20x20 board in the library.
Specification
8 stated · 0 not published · 1 not researched
| Attribute | Value | Evidence |
|---|---|---|
| Arm thickness | 6mm | |
| Frame class | 5in | |
| Material | carbon fiber | |
| Max prop size | 5in | |
| Motor mount pattern | 16x16 M319x19 M3 | |
| Stack mount | 30.5x30.5 M320x20 M2 | |
| Weight | 137g | |
| Wheelbase | 240mm | |
| Rotor layout | not researched |
not published: we looked; the vendor states nothingnot researched: nobody has looked yet estimated: derived, not vendor-stated
Additional data
Recorded on this part, outside the typed fields for its category
- kit_note
- Open-source frame (CAD published). Kit: top/middle/bottom plates, brace, 2 camera plates, 4 arms, arm spacer, M3 hardware and standoffs (30 mm + 22 mm). 20x20 FC mount also provided. 2 mm top/middle plates, 2.5 mm bottom.
Price
Indicative. Confirmed when the order is placed.
Converted
From USD at 1.1435 on 2026-07-09.
ECB euro foreign exchange reference rates, 2026-07-09 (USD per EUR, direct)
Compliance & origin
Claims
No compliance claim recorded for this part.
Origin
- Made in
- withheld. Odeon-resolved. Visible to licensed accounts.declaredlicensed
- Company location
- withheld. Recorded. Visible to approved accounts.account
- Manufacturer
- Team BlackSheep (TBS)
- NCAGE
- not recorded
- Category
- Frames
Company location is the manufacturer’s base, not the country of manufacture. Where a part states no origin, it stays unstated rather than inheriting its maker’s.
NCAGE identifies a company within the NATO Codification System. We record it where we have found it; not recorded means we have not established one, not that the manufacturer lacks one.
Design with this part
Put TBS Source One V6 (5in) into a build in Odeon Platform and its bill of materials comes back priced, sourced and checked against your programme’s compliance rules.